Seat Temp: 170°
Seat Temp: 90°

Shade Changes Everything

A mower seat in the shade measures 80°F cooler than the same seat in direct sun (and that's only on a 78° day!).

Choosing Rhinohide gives you that comfort—along with the durability, fit, and convenience that ordinary canopies often lack.

How to install your Rhinohide Canopy

Installing your Rhinohide Canopy

Rhinohide Canopies install with simple hand tools and typically take about 40 minutes the first time.

Tools You'll Need

  • Box knife for packaging
  • 3/4" deep well socket, open-end wrench, or ratcheting wrench
  • (2) 1/2" open-end or box wrenches
  • Drill with a 3/8" bit
  • Tape Measure
  • Marker or wax pencil
  • A friend (this always makes things go faster!)

The Basic Process

First, decide where you want your canopy positioned—above the roll bar or in front of it.

The mounting hardware assembles with nuts and bolts, so you can fine-tune the canopy position during installation.

The only drilling required is through the plastic shell to attach the support arms. 

Install your canopy while on relatively level ground.

See our step-by-step installation manual for complete instructions.

See Installation Manual