Side View of Rhinohide Canopy on Zero Turn Mower

Front View of Rhinohide Canopy on Zero Turn Mower

Rear View of Rhinohide Canopy on Zero Turn Mower

Universal Mower Canopy

$499

The Rhinohide Canopy is a shade canopy for zero turn mowers, or any other style of mower with a roll bar.

Thousands of customers have chosen the Rhinohide Canopy first and foremost because our canopy is indestructible.

And the Rhinohide is surprisingly lightweight at just 13 lb. And easily removable too, removing in just ten seconds. On top of this, our canopy is 100% made in the USA and backed by our Lifetime Warranty.

Compatible Zero Turn Mowers

Our Rhinohide Canopy fits all mower roll bars. Seriously, we haven’t found a roll bar we don’t fit. We even have round U-bolts for those of your with a roll bar made from round tube steel (our U-bolts have an inside diameter of 2.5 inches).

In other words, the hardware included with our Universal Mower Canopy fits all zero turn mowers with a roll bar—including mowers from Scag, John Deere, Bad Boy, Gravely, Toro, Kubota, Exmark, Spartan, Dixie Chopper, Hustler, or any other manufacturer.

Double Use

If you also own a tractor in addition to your mower, you might be able to use a single canopy on both machines, saving your hundreds of dollars. Read more on the Multi-Kit below.

Virtually Indestructible
The Rhinohide Canopy shell is made from High-Density Polyethylene (HDPE). In short, we’ve never had to replace a broken canopy. It’s just plain tough. But the shell maintains a light weight of only 13 lb.

Plastic Vs Metal
The Rhinohide Canopy will hide scratches as it’s black all the way through. There is no paint to scratch, chip, or fade. It is very hard to dent, and unlike metal is light and easy to install and remove. And of course, it won’t rust either.

Removable
All models of the Rhinohide are removable, easy on and easy off. Quickly loosen two hand screws and slide the canopy off its risers.

Shipping is free!
- We ship within the continental USA
- Orders are shipped via UPS Ground
A tracking number will be emailed to you automatically
Orders typically ship the next business day
Orders are returnable within 60 days from receipt (if the product is unused)

Canopy Shell
Width x Length: 37 x 45 in
Weighs: 13 lb
Black, HDPE Plastic

Support Structure

Powder Coated Steel
Zinc Coated Hardware

U-Bolts Fit Up To A 2.5 inch Wide Roll Bar

Shipping Container

Width x Length x Height: 45 x 38 x 4 inches
Shipping Weight: 34 lb

We provide a Lifetime Warranty with every canopy we sell.

And it’s simple—if your canopy ever breaks , let us know and we’ll get you replacement parts at no cost.

Every single component of a Rhinohide Canopy is designed, fabricated, and packed in the USA.

We source American steel, American hardware, and American labor. Even the box we ship it in is in Made in America.

You can install your Rhinohide Canopy in 45 minutes or less.

The easiest way to understand how to install your Rhinohide Canopy is by watching us install one first.

While the video demonstrates the installation on a tractor, installation on a mower is exactly the same process.

View our printed installation instructions here.

Multi-Kit
If you own a second machine (like a zero turn mower) with a roll bar that has a width within 6″ of your tractor’s roll bar, add the Multi-Kit to your order to easily swap your canopy from one machine to the other, instead of buying two complete canopy kits.

There are some considerations for the Multi-Kit. You will fix the support arms to the canopy, so they will have a fixed dimension that needs to align to both roll bars.** You will likely need to make up some distance between the two machines with your own bushings/spacers/washers.

*You can compare the outside width of the narrower roll bar to the inside width of the wider roll bar.

5 ways our canopy beats the competition

We fit every tractor & mower

If your tractor or mower has a roll bar, you can use a Rhinohide Canopy.

Straight or angled.
Square, rectangular, or round.
Our standard hardware fits 95% of roll bars, and we have parts to fit the remaining 5%.

Unbreakable (Almost)

The Rhinohide Canopy is made from a very high-strength, lightweight plastic called HDPE.

Our shell absorbs impact when other plastics (or even metal) would crack, shatter, or dent.

There is no paint to peel or scratch off, and no rust either. Scratches are barely visible since our canopy is black all the way through.

Easy on, easy off

Need to drive in the woods?
Get under a low door?
Trailer your machine?

Remove your canopy in 10 seconds by loosening the two hand screws, and sliding off your canopy.

*Add our Grab Handles if you want to widen or narrow your grip stance.

Mount above or below

Traditional canopies only mount above the roll bar. But the Rhinohide can mount above or below, depending on your preference.

Our standard hardware supports either mounting location.

Made in the Heart of the USA

The shell, the steel, fabrication and powder coating, the hardware, and even the box it ships in.

From start to finish, a Rhinohide Canopy is completely made in the heart of America—Kansas.

We haven’t had to replace a canopy yet.

And we don’t expect you to be the first.

In the small chance something fails, each of our canopies comes
with our simple-to-understand Lifetime Warranty—
if anything goes wrong because of something we did, contact us.
We’ll make it right.

(This would be a natural place for a “Read More” button, but it really is this simple)

Our Lifetime Warranty is simple—if anything goes wrong because of something we did, contact us.

We’ll make it right.

Customer Reviews

Takes less than two minutes to swap with most of that time spent on loosening and retightening the knobs.

Rod T

That Rhinohide Canopy saved me twice while working in the woods.

And sure does make a huge difference working in sunny hot conditions.

Randy M

I’ve had mine on my zero turn mower for several years, and it still looks new.

Robert P

I put one on my Kubota L4600 today. It took an hour & 20 minutes to finish the install.

I’m impressed with the quality of the parts. Rhinohide is worth the money,

Terry G

I’ve bought 4. Have one on my Kubota tractor and another on my Scag mower. They are great.

Matt W

Money well spent… Best on market for durability and they can take a beating from overhanging limbs and still look great.

Karl R

Your Rhinohide cover supported the whole weight of my tractor with no damage to the cover. On a near roll over, it did bend the two brackets and a support arm. Proves you have a tough, well-engineered product that will last a very long time.

Fred L

Guys, what a GREAT PRODUCT! All parts are super stout and well made! Best part is that it’s made in USA.

I’d recommend to anyone and everyone!

Skip H

Installation was simple & straight forward, took about 30 min doing it myself. What a difference it makes, mowed during the heat of the day without any problems. It allowed the branches to slide up over the top instead of slapping me in the face. This is one tough product.

Darrell B

The install was easy thanks to the clear directions. The Easy On/Off feature is exactly as you described and what I was looking for. Overall great quality, thank you.

George C

Got the Rhinohide canopy installed this morning and I am very pleased!! Decided to mount it lower for garage door clearance, surprisingly… even this height absolutely does not impact mounting or dismounting the tractor at all. Thanks for a great TOUGH product!!

David V

I’m an old guy and worked alone. That being said, the project went well. I could have done it in 1/3 the time if I would have had a helper. I’m very pleased with the canopy.

All in all, a nice addition to my tractor. Thanks!!

Frank H