Do you have a tractor with a roll bar that angles forward toward the top? We designed support arms to angle in front of the roll bar.
Common Tractors with roll bars like this are from from TYM, Rural King, or Mahindra. Note this isn’t for every TYM, Rural King, or Mahindra tractor, only for those with roll bars like the ones in the photos on this page. If your tractor has a roll bar that doesn’t angle forward more than 15°, buy our Universal Tractor Canopy.
Only the Rhinohide Canopy is removable, lightweight, virtually indestructible, and can mount below the top of your roll bar. And our canopy is made in the United States.
Rhinohide Canopy Highlights
- Virtually Indestructible
- Stronger and More Durable Than Metal or ABS or Fiberglass
- Lightweight Shell
- Weighs only 13 lb
- Easily Removable
- Loosen Two Hand Screws And Slide Off
- Can Mount Below Top Of Roll Bar
- Maintain Clearance Under Garage Doors
- Black UV Protected HDPE Shell Will Not Fade
- Dimenions: 37 x 45 Inches (Canopy Shell Width x Length)
- Universal Fit to any Rectangular Roll Bar (ROPS)
- One Canopy Can Mount to Multiple Machines (w/ Multi Kit)*
- Also Used To Mount Over a Tractor Backhoe**
- Lifetime Warranty
- 100% Made in USA
- Always in Stock
*To swap the Rhinohide Canopy from one machine to another, the roll bar width needs to be within 4 inches. And still might require you buying bushings/spacers/washers to make up fractions of an inch difference.
**Note the angle of the roll bar, as well as interference from light brackets and hinges may not allow for placement of both forward facing and rear facing (backhoe) hardware. If you are purchasing a backhoe kit, please ensure you have at least 8″ of clear space on the vertical posts of your roll bar for placement of two L-Brackets.
Canopy Features
The Rhinohide Canopy is a universal canopy system designed for any tractor or mower with a Roll Over Protection System (ROPS), otherwise known as a roll bar.
True to its name, the Rhinohide Canopy is virtually unbreakable—made from a very high strength and lightweight plastic (HDPE). We have yet to hear of an encounter too strong for the canopy, yet at just 13 lb the shell is still lightweight enough for anyone to handle.
When metal will dent, scratch, or rust, the Rhinohide barely shows a marks. When Fiberglass or other plastics like ABS will crack or shatter, the Rhinohide looks like new.
Remove your Rhinohide Canopy in twenty seconds with the twist of two hand screws. This is perfect if you need to remove the canopy for storage, trailering, or for low-clearance areas on your property. And it’s especially handy if you’re moving the canopy to the rear of your tractor to cover your backhoe, or to another tractor or mower.
Our canopy is 37″ wide x 45″ deep. The closer you mount it to your head, the more shade it will provide. The best position for the canopy is about 9–15″ above your head when seated. On tractors this often means mounting in front of and below the top of your roll bar.
Depending on the position of your seat, and position and design of your roll bar, this may or may not allow for much rear head coverage. But the position of the canopy is up to you.
Backhoe / Multi-Kit
If your tractor has a backhoe, you may consider adding our Backhoe / Multi Kit. The kit includes a second set of mounting hardware you can attach to the roll bar immediately above or below the first set. Just face it rearward, so you can swap your canopy from forward facing to rear facing.
Or, if you own a second machine (like a zero turn mower) with a roll bar that has a width within 4″ of your tractor’s roll bar, add the Multi Kit (above) to your order and easily swap your canopy from one machine to the other instead of buying two complete canopy kits.
*Note you can compare the outside-to-outside width of the narrower roll bar to the inside-to-inside width of the wider roll bar.
Ordering (Read This Before Ordering!)
We make one, universal canopy to fit all tractors. So it doesn’t matter if your tractor is from John Deere, Kubota, Kioti, Mahindra, Massey, LS, Yanmar, TYM, Bobcat, New Holland, Bad Boy, Summit or any other manufacturer! It’s all about the roll bar, and 95% of tractor’s we sell to have a roll bar that fits our standard hardware.
If your roll bar is made from tube steel wider than 2.5 inches, select Roll Bar Tube Steel Wider than 2.5 in. If your roll bar tube steel is deeper than 4 inches, select Roll Bar Tube Steel Deeper than 4 in.
Likewise if your roll bar is wider than 42 inches outside-to-outside, select Extended L-Bracket, and we’ll ship out the proper hardware.
If your roll bar has an angle greater than 15 degrees, we have parts made just for that. If you have the John Deere 1025R or 2025R, order from this listing. If you have another tractor with a roll bar that’s bent forward, order from this listing.
Installation
Install your canopy in less than an hour. For instructions on how to attach your canopy, watch this video or read our instruction guide here.
